UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 331
Description
Use Program 21-15: Individual Trunk Group Routing for Extensions to designate
the alternate trunk access route accessed when a user dials the Alternate Trunk
Route Access Code. Refer to Program 11-09 : Trunk Access Code when setting up
alternate trunk codes. Refer to 14-06: Trunk Group Routing to set up the trunk routes.
When entering data for this option, enter the route number or 0 to prevent routing.
Conditions
None
Feature Cross Reference
Central Office Calls, Placing
Program 21 : Outgoing Call Setup
21-15 : Individual Trunk Group Routing for Extensions
Level:
IN
Input Data
Extension Number Maximum eight digits
Day/Night Mode 1 ~ 8
Item No. Item Route Table Number Default
01
Round Table Number
0~100
(0 = No Setting)
0
To Next Page
Loading...
