NEC Univerge SV8100 - Loop Keys (OT)

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 217
Description
Use Program 15-13 : Loop Keys to assign the Loop Key data for each keyset
terminal. Loop Keys can be incoming, outgoing or both ways. Outgoing Loop Keys
use the entry in item 1. Incoming Loop Keys use the entry in item 2. Both Way Loop
Keys follow the entries in both item 1 and 2.
Conditions
 Please set Loop Key at Program 15-07 before setting Program 15-13
Feature Cross Reference
 Analog Communications Interface (ACI)
Program 15 : Extension, Basic Setup
15-13 : Loop Keys (OT)
Level:
IN
Input Data
Extension Number Max.8 digits
Key Number 01-48
Item
No.
Item Input Data Default
01
Outgoing Option
0-8 or 0-100
(0 = Assigns the Loop Key for ARS,
1-100 = Assigns the Loop Key to the trunk
group specified)
0
(Programming
Function Key No.-
01-32)
02
Incoming Option
0-8 or 0-100
(0 = Assigns the Loop Key to all trunk
groups,
1-100 = Assigns the Loop key to the trunk
group specified)
0
(Programming
Function Key No.-
01-32)