UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 469
Description
Use Program 35-02: SMDR Output Options to set the SMDR (Station Message
Detail Recording) output options for each of the eight SMDR ports. Refer to the
following chart for a description of each option, its range and default setting.
Program 35 : SMDR Account Code Setup
35-02: SMDR Output Options
Level:
IN
Input Data
SMDR Port Number 1~8
Item
No.
Item Input Data Default
01
Toll Restricted Call
SMDR can include or exclude calls blocked by Toll
Restriction.
0 = Not Displayed
1 = Displayed
1
02
PBX Calls
When the system is behind a PBX, SMDR can
include all calls (1) or just calls dialed using the PBX
trunk access code (0).
0 = Not Displayed
1 = Displayed
1
03
Trunk Number or Name
Select whether the system should display the trunk
name (0) or the number (1) on SMDR reports.
If this option is set to 1, Program 35-02-14 must
be set to 0.
0=Name
1 = Number
1
04
Summary (Daily)
Set this option to (1) to have the SMDR report
provide a daily summary (at midnight every night).
0 = Not Displayed
1 = Displayed
1
05
Summary (Weekly)
Set this option to (1) to have the SMDR report
provide a weekly summary (every Saturday at
midnight).
0 = Not Displayed
1 = Displayed
1
06
Summary (Monthly)
Set this option to (1) to have the SMDR report
provide a monthly summary (at midnight on the last
day of the month).
0 = Not Displayed
1 = Displayed
1
To Next Page
Loading...
