NEC Univerge SV8100 - Program 14: Trunk, Basic Setup; 14-01: Basic Trunk Data Setup

Programming Manual 2 - 149
Program
14
Description
Use Program 14-01: Basic Trunk Data Setup to set the basic options for
each trunk port. Refer to the chart below for a description of each option, its
range and default setting.
Program 14 : Trunk, Basic Setup
14-01: Basic Trunk Data Setup
Level:
IN
Input Data
Trunk Port Number 001~200
Item
No.
Item Input Data Default
Related
Program
01
Trunk Name
Set the names for trunks.
The trunk name displays on
a multiline terminal for
incoming and outgoing calls.
Up to 12 Characters
Refer to
below chart
02
Transmit Level
Use this option to select the
CODEC gain for the trunk.
The option sets the gain
(signal amplification) for the
trunk you are programming.
1~63
(-15.5dB~
+15.5dB in 0.5dB
intervals)
32 (0dB)
03
Receive Level
Use this option to select the
CODEC gain for the trunk.
The option sets the gain
(signal amplification) for the
trunk you are programming.
1~63
(-15.5dB ~ +15.5dB
in 0.5dB intervals)
32 (0dB)
04
Transmit Gain Level for
Conference and Transfer
Calls
Use this option to select the
CODEC gain type used by
the trunk when it is part of an
Unsupervised Conference.
1~63
(-15.5dB ~ +15.5dB
in 0.5dB intervals)
32 (0dB)