NEC Univerge SV8100 - Page 186

Issue 10.1 UNIVERGE SV8100
2 - 150 Program 14 : Trunk, Basic Setup
05
Receive Gain Level for
Conference and Transfer
Calls
Use this option to select the
CODEC gain type used by
the trunk when it is part of an
Unsupervised Conference.
1~63
(-15.5dB ~ +15.5dB
in 0.5dB intervals)
16 (-8dB)
(OT)
32 (0dB)
(AU)
06
SMDR Printout
Use this option to have the
system include/exclude the
trunk you are programming
from the SMDR printout.
Refer to Program 35-01 and
35-02 for SMDR printout
options.
0 = No Print Out
1=Prints Out
0 (OT)
1 (AU)
35-01
35-02
07
Outgoing Calls
Use this option to allow/
prevent outgoing calls on the
trunk you are programming.
0=Deny (No)
1 = Allow (Yes)
1
08
Toll Restriction
Use this option to enable/
disabled Toll Restriction for
the trunk. If enabled, the
trunk follows Toll Restriction
programming (example:
Programs 21-05, 21-06). If
disabled, the trunk is a toll
free line.
0 = Restriction
Disabled (No)
1 = Restriction
Enabled (Yes)
1 21-04
21-05
21-06
09
Private Line
0 = Disable
Private Line
(Normal)
1 = Enable Private
Line (Private
Line)
0
10
DTMF Tones for Outgoing
Calls
Use this option to enable (1)
or disable (0) DTMF tones for
outgoing trunk calls.
0 = Disable (No)
1 = Enable (Yes)
0
11
Account Code Required
0 = Disable (No)
1 = Enable (Yes)
1
12
--- Not Used ---
Item
No.
Item Input Data Default
Related
Program