NEC Univerge SV8100 - 10-06: ISDN BRI Setup

Issue 10.1 UNIVERGE SV8100
2 - 20 Program 10 : System Configuration Setup
Description
Use Program 10-06: ISDN BRI Setup define the TE1 selection and DID mode for
DID callers when the BRI feature is used.
Conditions
None
Feature Cross Reference
None
Program 10 : System Configuration Setup
10-06: ISDN BRI Setup
Level:
IN
Input Data
Slot Numberr 01 ~ 24
ISDN Line No. 01 - 04
Item
No.
Item Input Data Default
01
TE1 selection
Select the method the system uses when
assigning Terminal Endpoint Identifier
(TEI) values to BRI ports.
0 = Select by SPID number
1 = Select by Channel ID number
0
02
DID mode
0 = Route by Called Party Number
1 = Route by Redirecting Number
0
03
SPID1
Maximum 20 digits
0
04
SPID2
0