NEC Univerge SV8100 - Netlink Primary Automatic Integration Setting

Issue 10.1 UNIVERGE SV8100
2 - 650 Program 51 : NetLink Service
Description
Use Program 51-06: NetLink Primary Automatic Integration Settings to set the
automatic integration of the Primary system.
Conditions
None
Feature Cross Reference
None
Program 51 : NetLink Service
51-06 : NetLink Primary Automatic Integration Setting
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Primary Integration Right or Wrong
When LAN cable was divided, multiple Primary
systems may appear. If the LAN connection is
recovered, multiple Net-Links exist in the
network. When this option is enabling, NetLink
will be composed around Top priority Primary
System.
0 = Off
1 = On
0
02
Package Reset Timing Option
When Primary System Automatic Integration is
done, all packages of secondary systems will
reset. This option can select the timing of
package reset.
0 = Reset when all packages
are in idle condition.
1 = Anytime
0