NEC Univerge SV8100 - IP Trunk Availability

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 61
Description
Use Program 10-40 : IP Trunk Availability to enable or disable the ability to use SIP
trunks and assign the number of ports if IP Trunk is enabled.
Program 10 : System Configuration Setup
10-40 : IP Trunk Availability
Level:
IN
Input Data
Slot Number 1
Input Data
Item
No.
Item Input Data Default
01
IP Trunk
Availability
All IP trunks (SIP,
CCIS, or H.323)
must be contiguous.
If any IP trunks are
added to a system
that already has IP
trunks installed, and
the next set of trunks
is not contiguous,
then all IP trunks are
moved to a new set
of contiguous trunk
numbers.
0 = Disable
1 = Enable
0
02
Number of Ports
0: 0 Port
4: 4 Port
8: 8 Port
:
200: 200 Port
0
04
Number of IP
CCIS Ports
0: 0 Port
1: 1 Port
2: 2 Port
:
200: 200 Port
0