NEC Univerge SV8100 - Fill Command

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 939
Description
Use Program 92-06 : Fill Command to allocate the data of each extension number
of each extension group or each table.
The following table lists Programs that use the Fill Command function.
Program 92 : Copy Program
92-06 : Fill Command
Level:
IN
Input Data
Program Number XX-XX
Item
No.
Item Input Data
01
Source Number
Each extension port = 1~512 (PGR 11-02)
Each virtual extension port = 1~256 (PGR 11-04)
Each ACI port number = 1~96 (PGR 11-06)
Each extension group = 1~64 (PGR 11-07)
Each ACI group = 1~16 (PGR 11-08)
Each ACD group = 1~64 (PGR 11-17)
02
Destination Number (From)
03
Destination Number (To)
Program Number Program Name
11-02 Extension Numbering
11-04 Virtual Extension Numbering
11-06 ACI Extension Numbering
11-07 Extension (Department) Group Pilot Number
11-08 ACI Group Pilot Number
11-17 ACD Group Pilot Number