NEC Univerge SV8100 - DTMF Tone Receiver Setup

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 679
Description
Use Program 80-03 : DTMF Tone Receiver Setup to define the various levels and
timers for the DTMF Tone Receiver.
DTMF Tone Receiver Type:
 1 = DTMF Receiver for Extension
 2 = DTMF Receiver for Trunk
 3 ~ 5 = Reserved
Program 80 : Basic Hardware Setup for System
80-03 : DTMF Tone Receiver Setup
Level:
IN
Input Data
DTMF Tone Receiver Type No. 1 = DTMF Receiver for Extension
2 = DTMF Receiver for Trunk
3 = --- Reserved ---
4 = --- Reserved ---
5 = --- Reserved ---
Item No Item Input Data
01
Detect Level
0 = 0dBm ~ -25dBm
1 = -5dBm ~ -30dBm
2 = -10dBm ~ -35dBm
3 = -15dBm ~ -40dBm
4 = -20dBm ~ -45dBm
5 = -25dBm ~ -50dBm
6 = -30dBm ~ -55dBm
02
Start Delay Time
0~255 (0.25ms ~ 64ms)
03
Min. Detect Level
0~15
DTMF Tone 0: -15dBm(0) to -25dBm(15)
DTMF Tone 1: -15dBm(0) to -30dBm(15)
DTMF Tone 2: -20dBm(0) to -35dBm(15)
DTMF Tone 3: -25dBm(0) to -40dBm(15)
DTMF Tone 4: -30dBm(0) to -45dBm(15)
DTMF Tone 5: -35dBm(0) to -50dBm(15)
DTMF Tone 6: -40dBm(0) to -55dBm(15)