Issue 10.1 UNIVERGE SV8100
2 - 46 Program 10 : System Configuration Setup
Description
Use Program 10-27: H.323 Interconnection with Application Setup to set the IP
address of the network IP systems.
Conditions
None
Feature Cross Reference
None
Program 10 : System Configuration Setup
10-27: H.323 System Interconnection w/ Application Setup (OT)
Level:
SA
Input Data
System ID 01-50
Input Data
Item
No.
Item Input Data Default Default
01
IP Address
System ID is related with the
System ID in the Numbering Plan
(Program 11-01-03). When the
digits are analyzed and the
system ID is determined from the
SV8100 data set in the
Numbering Plan, the networking
call will be sent to the IP Address
set in this program.
The IP Address should be the IP
Address of the peer CPU
(Program 10-12-01)
1.0.0.1_126.255.255.254
128.1.0.1 _191.254.255.254
192.0.1.1 _223.255.254.254
0.0.0.0 11-01-01
10-12-01
02
Call Procedure Port
The Port Number should be set
with the same value as the H.225
setup port in Program 84-02-33.
1-65535 1730 84-02-33
To Next Page
Loading...
