NEC Univerge SV8100 - 90-22: Terminal Version Information

Issue 10.1 UNIVERGE SV8100
2 - 888 Program 90 : Maintenance Program
Description
Use Program 90-22: Terminal Version Information to determine the hardware and
firmware versions. These are read-only commands and cannot be changed.
Conditions
 This Program is “Read Only.”
Feature Cross Reference
 None
Program 90 : Maintenance Program
90-22: Terminal Version information
Level:
IN
Input Data
Terminal Type 1 = IP Terminal
2 = IP Adaptor
Input Data
Item No. Item Input Data Default
01
Hardware Version
00~FF
00
02
Firmware Version
00.00~FF.FF
00.00