UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 67
Description
Use Program 10-46 : DT700 Server Information Setup to setup the information of
SIP Multiline (DT700 series) Server.
Program 10 : System Configuration Setup
10-46 : DT700 Server Information Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default
Related
Program
01
Register Mode
Normal:
When the phone boots up,
it reports the ext. assigned
in the phone or chooses the
next available extension in
the system. Password is
not required.
Auto:
If set to Auto, the SIP user
name and password must
be entered in the actual IP
phone. These settings must
match 84-22/15-05-27, or
the phone does not come
on-line.
Manual:
When the phone boots up,
it prompts user to enter a
user ID and password
before logging in. It checks
this user ID/password
against 84-22/15-05-27. If
there is no match, the
phone does not come on-
line.
0 = Normal
1 = Auto
2 = Manual
0
04
Server Name
Assign the Server name to
be used in the SIP URL.
Up to 32 characters
sipphd
To Next Page
Loading...
