NEC Univerge SV8100 - Page 104

Issue 10.1 UNIVERGE SV8100
2 - 68 Program 10 : System Configuration Setup
Conditions
None
06
Register Port
Assign the port number in
which the SIP messages
are sent to the IPLA. This
same port number must be
assigned in the SIP
Multiline terminals.
If this command is
changed, it requires a CPU
reset.
When Net Link is used
(PRG51-01-01 is other than
0), PRG51-17-01 of each
local system will be used
instead of this PRG.
0~65535
5080
07
Encryption Mode
0 = Off
1 = On
0
08
Encryption Type
0 = Mode1
0
09
One Time Password
Up to 10 characters
(0~9,
, #)
None 10-46-07
10
Start Port
1~512
1 10-46-01
11
Multicast IP Address
This sets the Multicast IP
address so that two or
more main devices don’t
overlap on the same
network, or if Multicast is
used by other IP services.
224.0.0.0~
239.255.255.255
224.0.0.10
12
Multicast Port
0~65535
30000
13
Subscribe Session Port
When Net Link is used
(PRG51-01-01 is other than
0), PRG51-17-02 of each
local system will be used
instead of this PRG.
0-65535
5081
14
NAT Mode
When the system controls
the SIP multiline terminal
via the NAT router, this
system data is set to On.
0 = Off
1 = On
0
Input Data
Item
No.
Item Input Data Default
Related
Program