Issue 10.1 UNIVERGE SV8100
2 - 2 Programming the UNIVERGE SV8100
Program 32 : Door Box and Sensor Setup
Program 33 : CTA and ACI Setup
Program 34 : Tie Line Setup
Program 35 : SMDR Account Code Setup
Program 40 : Voice Recording System
Program 41 : ACD Setup
Program 42 : Hotel Setup
Program 44 : ARS/F-Route Setup
Program 45 : Voice Mail Integration
Program 47 : InMail
Program 50 : Common Channel Interoffice Signaling Service (CCIS)
Program 51 : NetLink Service
Program 80 : Basic Hardware Setup for System
Program 81 : Basic Hardware Setup for Trunk
Program 82 : Basic Hardware Setup for Extension
Program 84 : Hardware Setup for VoIP
Program 85 : Hardware Setup for ETIA Switch (AU Only)
Program 90 : Maintenance Program
Program 92 : Copy Program
Program 93: System Information
Table 2-1 Programming Modes (Continued)
Program Number: Program Name
To Next Page
Loading...
