Issue 10.1 UNIVERGE SV8100
2 - 848 Program 85 : Hardware Setup for ETIA Switch
Conditions
None
Feature Cross Reference
Voice Over Internet Protocol (VoIP)
05
Back Pressure,
Half-Duplex
0 = Disable
1 = Enable
0
85-01-01 – Disable,
85-01-03 – Half-Duplex
When enabled, a switch
applies back pressure to
a half-duplex ingress port
while an output queue is
congested.
06
Flow Control, Full-Duplex
0 = Disable
1 = Enable
0
Full Duplex – 802.3x
85-01-01 – Disable
85-01-03 – Full-Duplex
When enabled, a switch
applies flow control to a
full-duplex ingress port
while an output queue is
congested.
Item
No.
Item Input Data Default Description
To Next Page
Loading...
