NEC Univerge SV8100 - Page 472

Issue 10.1 UNIVERGE SV8100
2 - 436 Program 31 : Paging Setup
Conditions
None
Feature Cross Reference
 Paging, External
 Paging, Internal
## = Accepts an entry (only required if two letters on the same key
are needed - ex: TOM). Pressing
# again = Space. (In system
programming mode, use the right arrow soft key instead to accept
and/or add a space.)
Recall Clear the character entry one character at a time.
Hold Clear all the entries from the point of the flashing cursor and to the
right.
Key for Entering Names (Continued)
When entering names in the procedures below, refer to this chart. Names can
have up to 12 digits.
Use this keypad
digit . . .
When you want to. . .
Input Data
Item
No.
Item Input Data Default
Related
Program
01
All Call Paging Zone Name
Assign a name to each All Call Internal Paging zone.
The name shows on the display of the telephone
making the announcement.
Up to 12
Characters
Group
All
11-12-19
31-02-02
02
Page Announcement Duration
This timer sets the maximum length of Page
announcements.
(Affects External Paging only)
0~64800
(sec)
1200
04
Privacy Release Time
Once the user initiates a Meet-Me Conference or
Voice Call Conference, the system waits this time for
the Paged party to join the call.
0~64800
(sec)
90