NEC Univerge SV8100 - Page 62

Issue 10.1 UNIVERGE SV8100
2 - 26 Program 10 : System Configuration Setup
04
Time Zone
0~24 (0 = -12 Hours and 24 = +12 Hours)
12
Determine the
offset from
Greenwich Mean
Time (GMT)
time. Then enter
its respective
value. For exam-
ple, Eastern
Time (US and
Canada) has a
GMT offset of -5.
The program
data would then
be 7 (0= -12, 1=
-11, 2= -10, 3= -
9, 4= -8, 5= -7,
6= -6, 7= -5,
……24= +12)
05
NIC Interface
0 = Auto Detect
1 = 100Mbps, Full Duplex
2 = 100Mbps, Half Duplex
3 = 10Mbps, Full Duplex
4 = 10Mbps, Half Duplex
0
NIC Auto
Negotiate
(
CD-CP00)
06
Network Address
Port Translation
(NAPT) Router
Setup
0 = No (Disable)
1 = Yes (Enable)
0
If using an exter-
nal NAPT Router
or not.
07
NAPT Router IP
Address
(Default Gateway
[WAN])
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
Set the IP
address on the
WAN side of
router.
08
ICMP Redirect
0= (Enable)
1= (Disable)
0
0 = signaling
packets WILL
follow ICMP
redirect
messages.
1 = signaling
packets WILL
NOT follow
ICMP redirect
messages.
 for voice
packets
and ICMP
refer to
PRG 84-
27-14
09
IP Address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
172.16.0.10 Set for IPLA.
Input Data (Continued)
Item
No.
Item Input Data Default Description