NEC Univerge SV8100 - Page 63

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 27
Conditions
 The system must be reset for these changes to take affect.
Feature Cross Reference
 Voice Over Internet Protocol (VoIP)
10
Subnet Mask
128.0.0.0 192.0.0.0 224.0.0.0
240.0.0.0 248.0.0.0 252.0.0.0
254.0.0.0 255.0.0.0 255.128.0.0
255.192.0.0 255.224.0.0 255.240.0.0
255.248.0.0 255.252.0.0 255.254.0.0
255.255.0.0 255.255.128.0 255.255.192.0
255.255.224.0 255.255.240.0 255.255.248.0
255.255.252.0 255.255.254.0 255.255.255.0
255.255.255.128 255.255.255.192 255.255.255.224
255.255.255.240 255.255.255.248 255.255.255.252
255.255.255.254 255.255.255.255
255.255.0.0 Set for IPLA.
11
NIC Setup
0 = Auto Detect
1 = 100Mbps, Full Duplex
2 = 100Mbps, Half Duplex
3 = 10Mbps, Full Duplex
4 = 10Mbps, Half Duplex
5 = 1 Gbps, Full Duplex
6 = 1 Gbps, Half Duplex
0
Set for IPLA.
The IPLB does
not support half
duplex
connections.
12
ICMP REDIRECT
(On Board)(VoIP
DB)
0 = Enable
1 = Disable
0
13
DNS Primary
Address
0.0.0.0–126.255.255.254
0.0.1–191.255255.254
192.0.0.1–223.255.255.254
0.0.0.0
Set for adding a
function for
DNS.
14
DNS Secondary
Address
0.0.0.0–126.255.255.254
0.0.1–191.255255.254
192.0.0.1–223.255.255.254
0.0.0.0
Set for adding a
function for
DNS.
15
DNS port
1 ~ 65535
53
Input Data (Continued)
Item
No.
Item Input Data Default Description