NEC Univerge SV8100 - Page 145

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 109
14
Text Message Setting
MLT 836 No
Setting
15
Enable Handsfree Incoming Intercom
Calls
MLT 821 721 20-09-05
20-02-12
16
Force Ringing of Incoming Intercom
Calls
MLT 823 723 20-09-05
20-02-12
17
Programmable Function Key
Programming
(3-Digit Service Codes)
MLT 851 751 15-07
11-11-38
18
BGM On/Off
MLT 825 725
19
Key Touch Tone On/Off
MLT 824 724
20
Change Incoming CO and ICM Ring
Tones
MLT 820 720 15-02
21
Check Incoming Ring Tones
MLT 811 711
22
Extension Name Programming
MLT 800 700 15-01
23
Second Call for DID/DISA/DIL
MLT 779 679
24
Change Station Class of Service
Allows an extension user to change the
COS of another extension. Must be
allowed in Program 20-13-28.
MLT 777 677 20-13-28
25
Automatic Transfer Setup for Each
Extension Group
MLT, SLT 702 602 20-11-17
24-05
26
Automatic Transfer Cancellation for
Each Extension Group
MLT, SLT 703 603
27
Destination of Automatic Transfer
Each Extension Group
MLT 704 604 20-11-17
24-05
28
Delayed Transfer for Every Extension
Group
MLT, SLT 705 605 20-11-17
24-05
24-02-08
29
Delayed Transfer Cancellation for
Each Extension Group
MLT, SLT 706 606 20-11-17
30
DND Setup for Each Extension Group
MLT, SLT 707 607
31
DND Cancellation for Each Extension
Group
MLT, SLT 708 608
32
--- Not Used ---
33
Dial Block
MLT, SLT 700 600
34
Temporary Toll Restriction Override
MLT, SLT 875 775 21-07
35
Pilot Group Withdrawing
MLT, SLT 750 650
Input Data (Continued)
Item
No.
Item Terminals
Default
(OT)
Default
(AU)
Related
Program