NEC Univerge SV8100 - Page 294

Issue 10.1 UNIVERGE SV8100
2 - 258 Program 20 : System Option Setup
09
Group Hold Initiate
Turns off or on an extension ability to initiate a Group
Hold.
0 = Off
1 = On
1
10
Group Hold Answer
Turns off or on an extension ability to pick up a call on
Group Hold.
0 = Off
1 = On
1
11
Automatic On-Hook Transfer
Turns off or on an extension ability to use Automatic
On Hook Transfer.
0 = Off
1 = On
1 (OT)
0 (AU)
12
Call Forwarding Off Premise (External Call
Forwarding)
Turns off or on an extension ability to set up Call
Forwarding Off-Premise for their telephone.
0 = Off
1 = On
0
13
Operator Transfer After Hold Callback
Turns off or on an extension ability to have a call
which recalls from hold transfer to the operator.
0 = Off
1 = On
0
14
Trunk-to-Trunk Transfer Restriction
Turns off or on the Trunk-to-Trunk Transfer
Restriction. If enabled, Trunk-to-Trunk Transfer is not
possible.
0 = Off
1 = On
0
15
VRS Personal Greeting (Message Greeting)
Turns off or on a Service Code to record, listen to, or
erase the Personal Greeting Message.
0 = Off
1 = On
1
16
Call Redirect
Turns off or on a multiline terminal user ability to
transfer a call to a predefined destination (such as an
operator, voice mail, or another extension) without
answering the call.
0 = Off
1 = On
0 (OT)
1 (AU)
17
Department Group Trunk-to-Trunk Transfer (Each
Telephone Group Transfer)
Turns off or on an extension user ability to set
Trunk-to-Trunk Forwarding for a Department Group.
0 = Off
1 = On
1
18
No Recall
No Recall set to "Allow" (1) will not stop transferred
calls from recalling from a virtual extension.
0 = Off
1 = On
0
19
Hold/Extended Park
Determine if an extension Class of Service should
allow either a normal or extended Park.
0 = Off
1 = On
0
20
No Callback
Turns off or on an extension to receive callbacks.
0 = Off
1 = On
0
Item
No.
Item Input Data
Default
COS 01~15