NEC Univerge SV8100 - Page 295

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 259
Conditions
None
Feature Cross Reference
 Class of Service
21
Restriction for Tandem Trunking on Hang Up
Allow (0) or Deny (1) an extension user ability to set
up a tandem/conference call automatically when they
hang up.
0 = Allow
1 = Deny
0
22
Restricted Unsupervised Conference
Allow (0) or Deny (1) an extension ability to initiate an
unsupervised conference.
0 = Allow
1 = Deny
0
23
VE Call Forward Set/Cancel
Turn on or off an extension ability to set or cancel call
forwarding for a virtual extension.
0 = Off
1 = On
0 (OT)
1 (AU)
24
Trunk Park Hold Mode
Set the hold type when a trunk call is put on hold by
an extension.
0 = Non
Exclusive
Hold (Off)
1 = Exclusive
Hold (On)
0 (OT)
1 (AU)
25
Transfer Park Call
Turn off or on an extension ability to transfer a parked
call.
0 = Off
1 = On
0 (OT)
1 (AU)
26
Station Park Hold mode (OT)
0 = Off
1 = On
0
27
Call Park Automatically Search
0 = Off
1 = On
1
28
Both Ring Enhancement
0 = Normal (default) rings on other extension when
the other paired extension is busy (not idle).
1 = Enhanced does not ring other extension when the
other paired extension is busy (not idle).
0 = Normal
1 = Enhanced
0
30
Disable Call FWD Indication on LCD
When set to 1, Call FWD setting is not shown on the
terminal LCD.
0 = Off
1 = On
0 (OT)
1 (AU)
Item
No.
Item Input Data
Default
COS 01~15