Issue 10.1 UNIVERGE SV8100
2 - 222 Program 15 : Extension, Basic Setup
Default
If a DIL rings a Virtual Extension, the Virtual Extension Key Operation Mode must
be set to 1.
Conditions
If a trunk call rings a Virtual Extension, the Virtual Extension Key Operation Mode
must be set to 1 (Land on the key), or the multiline terminal must have a CAP Key or
CO Line Appearance.
Feature Cross Reference
None
04
Show Internal Caller Information
When set to a 0, internal calls to the virtual
extension will not show the name or
number of the extension that is calling.
When set to 1, internal calls to the virtual
extension WILL show the name or number
of the extension that is calling if the virtual
is assigned to ring or if PRG 15-18-03 is
set to a 1.
0 = Do not show
1 = Show
0 15-09-01
15-18-03
05
One Ring
When set to a 0, the virtual extension
follows the normal ring cycle. When set to
a 1, the virtual extension will only ring one
time (the virtual extension must be first set
to ring in PRG 15-08).
0 = Normal Ring
Cycle
1 = One Ring
0 15-09-01
Item
No.
Item Input Data Default
Related
Program
To Next Page
Loading...
