NEC Univerge SV8100 - Page 177

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 141
04
Transfer Destination
Number
If Transfer mode is (Refer to 13-04-
03):
1 = Internal Dial Mode
1~9, 0,
, #, P, R, @
(Maximum 24 Characters)
2 = Incoming Ring Group 0 ~ 100
(IRG Number)
P=Pause
R=Recall
@ = Additional Digits when using
ISDN functionality
No
Setting
13-04-03
05
Incoming Ring
Pattern
Incoming Ring Pattern
0 = Normal Pattern
1 ~ 4 = Tone Pattern (1~4)
5 ~ 9 = Scale Pattern (1~5)
10 ~ 13 = Tone Pattern (5 ~ 8)
0 13-04-03
06
CR/PR feature
0 = Disable
1 = Enable
0 14-05
08
Memo 1
Define Memo Display
information tied to
Common Speed Dial
bin or Telephone
Book which match
with incoming Caller
ID. This will be
displayed in LCD Line
1.
Maximum of 28 digits
No
Setting
15-02-58
09
Memo 2
Define Memo Display
information tied to
Common Speed Dial
bin or Telephone
Book which match
with incoming Caller
ID. This will be
displayed in LCD Line
2.
Maximum of 28 digits
No
Setting
15-02-58
Item
No.
Item Input Data Default
Related
Program