NEC Univerge SV8100 - Page 229

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 193
39
CTI Override
Mode (AU)
0 = Disable
1 = Enable
0
Sets the override
function against
the terminal that is
controlled by the
CTI.
40
Calling Name
Display Info
viaTrunk for
Standard SIP
0 = Both name and
number
1 = Name only
2 = Number only
3 = None
0
Sets the incoming
calling name
display type on a
standard SIP
terminal. Trunk
name is the first
priority and
abbreviated
(SPD) name is
second priority.
41
Time Zone
(Hour)
0~24 (-12~+12)
12
Sets the time
difference from
the system time
set in Program
10-01. Input
hour(s) based on
this Program.
42
Time Zone
(minute)
0~120(-60 ~ +60
minute)
60
Sets the time
difference from
the system time
set in Program
10-01. Input
minute(s) based
on this Program.
43
Video Mode
0 = Disable
1 = Enable
0
This Program is
used to select the
video function
with the standard
SIP terminal. If
the standard SIP
terminal supports
the video function,
the SV8100
transfers the
video CODEC in
SDP information.
Item
No.
Item Input Data Default Description
Related
Program