NEC Univerge SV8100 - Page 241

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 205
88
Dial-In Mode
Switching
PRG 22-17 Table
No.
(1~100)
Off: Pattern 1, Pattern 5~8
On: Pattern 2
Slow flash: Pattern 3
Fast flash: Pattern 4
89
--- Not Used ---
90
--- Not Used ---
91
Live Recording Key
IPK II In-Mail
94
Call Attendant
Fast flash: Setup – No Answer Calls
Slow flash: 125ms:on
125ms:off
 125ms:on 625ms:off
On: Setup – Busy/No Answer Calls
96
MCT Activation Key
(AU)
97
Door Box Access
Key
Door Box Number
(1~8)
On: Door Box Busy
Off: Door Box Idle
Fast flash: Door Box Incoming
98~99
--- Not Used ---
#04
Change Restriction
Class
One-time Toll
Restriction
#06
Power Saving for
Power Save Group
Power Save Group
Number
00~16 (00 = All
Groups)
Fast flash (Red) : – Setup
#07
Fixed Operation
Mode
Night Mode Service
Group No. (01~32)
Fast flash (Red) : – Setup
Function Number List
[2] Appearance Function Level (*00 ~*99) (Service Code 852 (OT) / 752 (AU))
Function
Number
Function Additional Data LED Indication
00
ICM Key
None Red On: Off Hook on Intercom Call
Red Blink: Intercom Call on Hold
Function Number List (Continued)
[1] Normal Function Code (00 ~ 99) (Service Code 851 (OT) / 751(AU))
Function
Number
Function Additional Data LED Indication