NEC Univerge SV8100 - Page 287

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 251
08
Toll Restriction Dial Block
Turns off or on an extension to use Dial
Block.
0 = Off
1 = On
0
09
Hotline/Extension Ringdown
Turns off or on Ringdown Extension for
extensions with this COS.
0 = Off
1 = On
0
10
Signal/Voice Call
Turns off or on an extension allowing it
to force Handsfree Answerback or
Forced Intercom Ringing for outgoing
Intercom calls.
0 = Off
1 = On
1
11
Protect for the Call Mode Switching
from Caller
(Internal Call)
0 = Off
1 = On
0
12
Department Group Step Calling
Turns off or on an extension to use
Department Group Step Calling.
0 = Off
1 = On
1
13
ISDN CLIP
Determines if the ISDN calling line
identity presentation and screening
indicators are allowed.
0 = Off
1 = On
1
10-03-05
15-01-04
14
Call Address Information
0 = Off
1 = On
0
15
Block Outgoing Caller ID
Turns off or on the system ability to
automatically block outgoing Caller ID
information when a user places a call.
If this option is on, the system
automatically inserts the Caller ID block
code (defined in Program 14-01-21)
before the user-dialed digits.
0 = Off
1 = On
0
14-01-20
14-01-21
16
Display E911 Dialed Extension Name
and Number
Turns off or on an extension to display
the name and number of the extension
that dialed E911.
0 = Off
1 = On
0
17
ARS Override of Trunk Access Map
Turns off or on an extension ability to
override the trunk access map
programming for outgoing calls.
0 = Off
1 = On
0
Item
No.
Item Input Data
Default
Related
PRG
COS 01-15