NEC Univerge SV8100 - Page 290

Issue 10.1 UNIVERGE SV8100
2 - 254 Program 20 : System Option Setup
Conditions
None
Feature Cross Reference
 Class of Service
06
Incoming Time Display
0 = Off
1 = On
0
07
Call Queuing
Turn off or on an extension ability to have calls
queued if a call rings the extension when it is
busy.
0 = Off
1 = On
0 20-13-06
08
Calling Party Information
Turn off or on an extension ability to display
calling party information on CCIS calls.
0 = Off
1 = On
1 50-02-05
09
Deny Collect Call Receiving
Set the incoming ISDN/E1 collect call
block(reject) or not for the extension.
0 = Off
1 = On
0
11
ISDN malicious Call Trace (MCT) (AU)
0 = Off
1 = On
011-15-15
12
Deny Collect Call Receiving for CO Trunk (OT)
0 = Off
1 = On
0
13
DND Active While Ringing
When set to 0, and if set DND during an incoming
call, the call for the terminal stops immediately.
When set to 1, and if set DND during an incoming
call, the call for the terminal continues ringing and
is set for the next call.
0=Immediate
1 =Next Call
0
Item
No.
Item Input Data
Default
Related
Program
COS 01~15