NEC Univerge SV8100 - Page 320

Issue 10.1 UNIVERGE SV8100
2 - 284 Program 20 : System Option Setup
Conditions
None
Feature Cross Reference
 ISDN Compatibility
11
Automatic Changing System Clock When Date/
Time Information Element Received
0 = Disable (Off)
1 = Enable (On)
1 (OT)
0 (AU)
12
Call Forward Options (Auto Connect Send)
Incoming Calls Forwarded Out Automatically Return
Connect Message When Outgoing Call Receives
Alerting Message.
0 = Normal – No
Message (Off)
1 = Normal – No
Message (On)
0
13
Local Busy Tone (Release)
Busy tone send when T-point receiving a RELEASE
message from Network.
0=Off
1=On
0 (OT)
1 (AU)
14
No Response Release Send
Operation mode setting for when second T303 timer
expires.
0=Off
1=On
0
15
Call Reference Selection for PRI 2B-Channel
Transfer
When transferring a call via 2B-Channel Transfer,
select Call Reference information as “Negative Integer”
(0), or as is “No Edit” (1).
0 = Negative Integer
1 = No Edit
0
Input Data
Item
No.
Item Input Data Default