NEC Univerge SV8100 - Page 52

Issue 10.1 UNIVERGE SV8100
2 - 16 Program 10 : System Configuration Setup
Conditions
 When changing a defined terminal type, first set the type to 0 and then plug the
new device in to have the system automatically define it, or redefine the type
manually.
 The system must have a blade installed to view/change the options for that type of
blade.
Feature Cross Reference
 Universal Slots
03
Zero Code Suppression
0=B8ZS
1 = AMI/ZCS
0
04
Line Length Selection
0 = 0 feet ~ 133 feet
1 = 133 feet ~ 266 feet
2 = 266 feet ~ 399 feet
3 = 399 feet ~ 533 feet
4 = 533 feet ~ 655 feet
0
05
T1 Clock Source
0 = Internal
1=External
1
06
Number of Ports
0=Auto
1=4 Ports
2=8 Ports
3 = 12 Ports
4 = 16 Ports
5 = 20 Ports
0
07
Straight/Cross Wiring
0 = Auto
1 = Manual (Cross)
2 = Manual (Straight)
0