NEC Univerge SV8100 - Page 574

Issue 10.1 UNIVERGE SV8100
2 - 538 Program 44 : ARS/F-Route Setup
Conditions
None
Feature Cross Reference
 Automatic Route Selection (ARS)
07
ARS Class of Service
Select the ARS Class of Service to use for the table.
An extension ARS COS is determined in Program
26-04-01.
0~16
0
08
Dial Treatment
Select the Dial Treatment to use for the table. If a
Dial Treatment is selected, Programs 44-05-02 and
44-05-03 are ignored and the Dial Treatment
defined in Program 26-03-01 is used instead.
0~15
0
09
Maximum Digit
Input the maximum number of digits to send when
using the F-Route.
0~24
0
10
CCIS over IP Destination Point Code
Input the Destination Point Code to send when using
this F-Route.
0~16367
0
11
Network Specified Parameter Table
Enter a table number from Program 26-12.
0~16
0
Item
No.
Item Input Data Default