NEC Univerge SV8100 - Page 662

Issue 10.1 UNIVERGE SV8100
2 - 626 Program 50 : Common Channel Interoffice Signaling Service
Description
Use Program 50-03: CCIS Destination System Settings to assign information of
remote systems in a CCIS Network.
Conditions
None
Feature Cross Reference
None
Program 50 : Common Channel Interoffice Signaling Service
50-03: CCIS Destination System Settings
Level:
IN
Input Data
CCIS System ID 1~255
Item
No.
Item Description Input Data Default
01
Destination Point
Code
Define the Point Code at the
Destination Party.
0~16367
0
02
CCIS Route ID
(T1 only)
Select the CCIS Route ID defined in
Program 14-13 when the user tries to
access the system in a CCIS network.
0~8
(CCIS Route IDs
5~8 are for
future use and
should not be
used.)
0
03
IP Address
(IP only)
Assign the IP Address to a CCIS
System ID.
xxx.xxx.xxx.xxx
(xxx = 0~255)
0.0.0.0
04
Point Code
Availability
Define if the system associated with
Destination Code can be Reached (1)
or Not Reached (0). If set to 0
(Disable), when using the IP-CCIS, that
system cannot be called until it is set to
1 (Enable).
0 = Disable
1 = Enable
1