NEC Univerge SV8100 - Page 831

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 795
Note 1: For IPLA, 0~270ms is valid. If set to more than 270ms, then buffer size is 270ms.
Note 2: For IPLA, 0~160ms is valid. If set to more than 160ms, then buffer size is 160ms.
Conditions
None
Feature Cross Reference
None
61
T.38 RTP Format Payload Number
96~127
100
62
DTMF Level Mode
Used only by IPLB.
0 = VoIPU default value
1 = Main soft value
0
63
DTMF Level High
Used only by IPLB.
0 = Disable
1 = -33dBm
:
28 = -6dBm
28
64
DTMF Level Low
Used only by IPLB.
0 = Disable
1 = -33dBm
:
28 = -6dBm
28
65
VAD Negotiation on SDP
Select whether or not system uses SIP
negotiation for VAD usage. When set to
'0 = Disable' system disregards SIP
negotiation result and always enables
the VAD. When set to'1 = Enable'
system uses SIP negotiation and
decides VAD usage according to the
result.
0 = Disable
1 = Enable
0
66
Voice Band Data (VBD)
Enable or Disable the VBD feature.
This program has to set '1 = Enable'
when PRG15-03-03 is set '1 = Special'
and also PRG15-03-18 is '1 = Modem'
Related: PRG 15-03-03, PRG 15-03-18
0 = Disable
1 = Enable
0
67
VBD Payload Type
Setup the Payload Type number when
using VBD.
96 ~ 127
97
Input Data
Item
No.
Item Input Data Default