NEC Univerge SV8100 - Page 838

Issue 10.1 UNIVERGE SV8100
2 - 802 Program 84 : Hardware Setup for VoIP
08
G.729 Silence Compression (VAD)
Mode
Select whether to compress silence with
G.729. When there is silence, the RTP
packet is not sent.
0 = Disable
1 = Enable
0
09
G.729 Jitter Buffer - Minimum
Set the minimum value of the Jitter Buffer
of G.729 is set. Jitter is the variation in the
time between packets arriving and the
buffer allows this variation to be absorbed.
0~300ms (Note 1)
20
10
G.729 Jitter Buffer - Standard
Set the average G.729 Jitter Buffer.
0~300ms (Note 1)
40
11
G.729 Jitter Buffer - Maximum
Set the maximum G.729 Jitter Buffer.
0~300ms (Note 1)
80
12
Number of G.723 Audio Frame
Maximum number of the G.723 Audio
Frame.
1=30 msec
2=60 msec
1
13
G.723 Silence Compression (VAD)
Mode
If enabled, RTP packets are not sent for
the compressed silence.
Not used by IPLB
0 = Disable
1 = Enable
0
14
G.723 Jitter Buffer - Minimum
Set the minimum value of the G.723 Jitter
Buffer.
0~300ms (Note 1)
30
15
G.723 Jitter Buffer - Standard
Set the average value of the G.723 Jitter
Buffer.
0~300ms (Note 1)
60
16
G.723 Jitter Buffer - Maximum
Set the maximum value of the G.723 Jitter
Buffer.
0~300ms (Note 1)
120
Input Data
Item
No.
Item Input Data Default