NEC Univerge SV8100 - Page 844

Issue 10.1 UNIVERGE SV8100
2 - 808 Program 84 : Hardware Setup for VoIP
Note 1: For IPLA, 0~270ms is valid. If set to more than 270ms, then buffer size is 270ms.
Note 2: For IPLA, 0~160ms is valid. If set to more than 160ms, then buffer size is 160ms.
Conditions
 These commands are for SIP analog Extension.
Feature Cross Reference
None
62
DTMF Level Mode
Used only by IPLB.
0 = VoIPU default value
1 = Main soft value
0
63
DTMF Level High
Used only by IPLB.
0 = Disable
1 = -33dBm
:
28 = -6dBm
28
64
DTMF Level Low
Used only by IPLB.
0 = Disable
1 = -33dBm
:
28 = -6dBm
28
Input Data
Item
No.
Item Input Data Default