EasyManua.ls Logo

NEC Univerge SV8100 - Page 868

NEC Univerge SV8100
986 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Issue 10.1 UNIVERGE SV8100
2 - 832 Program 84 : Hardware Setup for VoIP
10
DTMF Twist Positive Level
Used only by IPLB.
0~24(dB)
5
11
DTMF Twist Negative Level
Used only by IPLB.
0~24(dB)
0
12
DTMF Duration (Out of Band)
Used only by IPLB. Effective when
84-27-01 = 2 (Out of Band).
30~2000(ms)
100
13
DTMF Level
Used only by IPLB. Effective when
84-27-01 = 2 (Out of Band).
1~61 (-36dB ~ +24dB)
1: -36dB
2: -35dB
:
37: 0dB
:
60: 23dB
61: 24dB
25 (-12db)
14
ICMP Redirect
Used only by IPLB.
0 = Enable
1 = Disable
0 = voice packets WILL follow
ICMP redirect messages.
1 = voice packets WILL NOT
follow ICMP redirect
messages.
for signaling packets and
ICMP refer to PRG 10-12-08.
1
15
DTMF Detect Minimum Duration
Used only by IPLB.
This setting is the minimal time setting to
distinguish DTMF tones for the IPLB. If
the signal is shorter than the value set,
the signal is deemed not a DTMF.
23 ~ 2000(ms)
30
16
DTMF Detect Minimum Level
Used only by IPLB.
This setting is the minimal level setting to
distinguish DTMF tones for the IPLB. If
the signal is shorter than the value set,
the signal is deemed not a DTMF.
0: -40dbm
1: -39dbm
2: -38dbm
:
31: -9dbm
2 (-38dbm)
Input Data
Item
No.
Item Input Data Default

Table of Contents

Other manuals for NEC Univerge SV8100

Related product manuals