Issue 10.1 UNIVERGE SV8100
2 - 930 Program 92 : Copy Program
The Copy Program is applicable only for the following programs:
Trunk Port Base
Trunk Group Base
Extension Base
Program
No.
Program Name Note
14-01
Trunk Basic Data Setup Copy all data except Trunk Name
(Item 01).
14-02
Analog Trunk Data Setup
14-04
Behind PBX Setup
14-08
Music on Hold Source for Trunks
14-09
Conversation Recording Destination for Trunk
20-30
Timer Class for Trunk
21-03
Trunk Group Routing for Trunks
21-12
ISDN Calling Party Number Setup for Trunk
21-21
Toll Restriction for Trunks
21-22
CO Message Waiting Indication
22-02
Incoming Service Type Setup
22-03
Trunk Ring Tone Setup
22-05
IRG Assignment for Normal Ring Trunk
22-08
Second IRG Setup for Unanswered DIL / IRG
31-05
Incoming Ring Tone Audible on External Speaker
Program
No.
Program Name Note
35-03
SMDR Port Assignment for Trunk Group
Program
No.
Program Name Note
15-01
Extension Basic Data Setup (include Virtual
Extension)
Copy all data except extension
name (item 01).
15-02
Multiline Telephone Basic Data Setup
To Next Page
Loading...
