NETGEAR ProSafe GSM7224P - Lacp Actor Admin State Individual; Lacp Actor Admin Key

Switching Commands
120
ProSafe Managed Switch
Note: This command is only applicable to port-channel interfaces.
no lacp collector max delay
Use this command to configure the default port-channel collector max delay.
Format no lacp collector max-delay
Mode
lacp actor admin
Use this command to configure the LACP actor admin parameters.
lacp actor admin key
Use this command to configure the administrative value of the LACP actor admin key. The
valid range for <key> is 0-65535.
Default
Format lacp actor admin key <key>
Mode
Note: This command is only applicable to physical interfaces.
no lacp actor admin key
Use this command to configure the default administrative value of the key.
Format no lacp actor admin key
Mode
lacp actor admin state individual
Use this command to set LACP actor admin state to individual.
Format lacp actor admin state individual
Mode
Format lacp collector max-delay <delay>
Mode
Interface Config
Interface Config
Internal Interface Number of this Physical Port
Interface Config
Interface Config
Interface Config