Management Commands
654
ProSafe Managed Switch
port
Use the port command in TACACS Configuration mode to specify a server port number.
The server <port-number> range is 0 - 65535.
Default
Format port
<port-number>
Mode
priority
Use the priority command in TACACS Configuration mode to specify the order in which
servers are used, where 0 (zero) is the highest priority. The <priority> parameter
specifies the priority for servers. The highest priority is 0 (zero), and the range is 0 - 65535.
Default
Format priority
<priority>
Mode
timeout
Use the timeout command in TACACS Configuration mode to specify the timeout value in
seconds. If no timeout value is specified, the global value is used. The <timeout>
parameter has a range of 1-30 and is the timeout value in seconds.
Format timeout <timeout>
Mode
show tacacs
Use the show tacacs command to display the configuration and statistics of a TACACS+
server.
Format show tacacs [<ip-address|hostname>]
Mode
Host Address
Port
TimeOut
Priority
49
TACACS Config
0
TACACS Config
TACACS Config
Privileged EXEC
Term Definition
The IP address or hostname of the configured TACACS+ server.
The configured TACACS+ server port number.
The timeout in seconds for establishing a TCP connection.
The preference order in which TACACS+ servers are contacted. If a server
connection fails, the next highest priority server is contacted.
To Next Page
Loading...
