User Name
Access Mode
SNMPv3
Access Mode
SNMPv3
Authentication
SNMPv3
Encryption
Management Commands
616
ProSafe Managed Switch
show users accounts
Use this command to display the local user status with respect to user account lockout and
password aging.
Format show users accounts
Mode
User Name
Privilege
Password aging
Lockout Status
Password
Expiration Date
show users accounts detail
This command displays the local user status with respect to user account lockout and
password aging. It also includes information about Password strength and complexity.
Format show users accounts detail
Mode
(Switch) #show users accounts detail
UserName....................................... admin
Privilege...................................... 15
Password Aging................................. ---
Password Expiry................................ ---
Term Definition
The name the user enters to login using the serial port, Telnet or Web.
Shows whether the user is able to change parameters on the switch (Read/Write) or is
only able to view them (Read Only). As a factory default, the “admin” user has
Read/Write access and the “guest” has Read Only access. There can only be one
Read/Write user and up to five Read Only users.
The SNMPv3 Access Mode. If the value is set to ReadWrite, the SNMPv3 user is able
to set and retrieve parameters on the system. If the value is set to ReadOnly, the
SNMPv3 user is only able to retrieve parameter information. The SNMPv3 access mode
may be different than the CLI and Web access mode.
The authentication protocol to be used for the specified login user.
The encryption protocol to be used for the specified login user.
Privileged EXEC
Term Definition
The local user account’s user name.
The user’s privilege level (1-15).
The password aging time for the local users.
Indicates whether the user account is locked out (true or false).
The current password expiration date in date format.
Privileged EXEC
To Next Page
Loading...
