NETGEAR ProSafe GSM7224P - Area Nssa Default-Info-Originate (Ospf); Area Nssa No-Redistribute (Ospf)

Routing Commands
271
ProSafe Managed Switch
no area nssa
This command disables nssa from the specified area id.
Format no area <areaid> nssa
Mode
area nssa default-info-originate (OSPF)
This command configures the metric value and type for the default route advertised into the
NSSA. The optional metric parameter specifies the metric of the default route and is to be in
a range of 1-16777214. If no metric is specified, the default value is 10. The metric type can
be comparable (nssa-external 1) or non-comparable (nssa-external 2).
Format area <areaid> nssa default-info-originate [<metric>] [{comparable |
non-comparable}]
Mode
no area nssa default-info-originate (OSPF)
This command disables the default route advertised into the NSSA.
Format no area <areaid> nssa default-info-originate [<metric>] [{comparable
| non-comparable}]
Mode
area nssa no-redistribute (OSPF)
This command configures the NSSA Area Border router (ABR) so that learned external
routes will not be redistributed to the NSSA.
Format area <areaid> nssa no-redistribute
Mode
no area nssa no-redistribute (OSPF)
This command disables the NSSA ABR so that learned external routes are redistributed to
the NSSA.
Format no area <areaid> nssa no-redistribute
Mode
Router OSPF Config
Router OSPF Config
Router OSPF Config
Router OSPF Config
Router OSPF Config