Format set igmp maxresponse <vlan_id> <1-25>
Mode
Switching Commands
164
ProSafe Managed Switch
no set igmp maxresponse
This command sets the max response time (on the interface or VLAN) to the default value.
Format no set igmp maxresponse
Mode
• Global Config
• Interface Config
Format no set igmp maxresponse <vlan_id>
Mode
set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time. The time is set for the
system, on a particular interface or VLAN. This is the amount of time in seconds that a switch
waits for a query to be received on an interface before the interface is removed from the list of
interfaces with multicast routers attached. The range is 0 to 3600 seconds. A value of 0
indicates an infinite time-out, i.e. no expiration.
Default
Format set igmp mcrtrexpiretime <0-3600>
Mode
• Global Config
• Interface Config
Format set igmp mcrtrexpiretime <vlan_id> <0-3600>
Mode
no set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time to 0. The time is set for the
system, on a particular interface or a VLAN.
Format no set igmp mcrtrexpiretime
Mode
• Global Config
• Interface Config
Format no set igmp mcrtrexpiretime <vlan_id>
Mode
VLAN Config
VLAN Config
0
VLAN Config
VLAN Config
To Next Page
Loading...
