NETGEAR ProSafe GSM7224P - Software License Commands; Show License

Utility Commands
584
ProSafe Managed Switch
Software License Commands
Release 9.0 allows the XSM7224S to be licensed such that this switch can configure
advanced features.
The following table lists the software license matrix for the XSM7224S:
Managed Switches
Note: The software license will allow the user to download a license file
only on the Master unit. The file cannot be downloaded on a Slave
unit.
There are two options to download the license file to the switch:
• Use the command Copy to download the license file through the CLI.
• Go to the Maintenance > Download page to download the licence file through the GUI.
show license
This command displays the license status.
License Date indicates the date of the license. License Status indicates whether license is
active or inactive.
Format show license
Mode
Example: The following shows example CLI display output for the command.
(Managed Switches) #show license
License date : Apr-9-2010
Field Description
Sampler Data
Source
The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support Physical
ports only.
Receiver Index
The sFlowReceiver configured for this sFlow sampler.
Packet
Sampling Rate
The statistical sampling rate for packet sampling from this source.
Max Header
Size
The maximum number of bytes that should be copied from a sampled packet to form a
flow sample.
Switch IPv4 Routing IPv6 Routing IP Multicast
Licensed Licensed Licensed
Privileged EXEC