NETGEAR ProSafe GSM7224P - Show Ip Ospf Range

Routing Commands
302
ProSafe Managed Switch
The following shows example CLI display output for the command.
(Switch) #show ip ospf neighbor 170.1.1.50
Interface.....................................0/17
Neighbor IP Address...........................170.1.1.50
Interface Index...............................17
Area Id.......................................0.0.0.2
Options.......................................0x2
Router Priority...............................1
Dead timer due in (secs)......................15
Up Time.......................................0 days 2 hrs 8 mins 46 secs
State.........................................Full/BACKUP-DR
Events........................................4
Retransmission Queue Length...................0
show ip ospf range
This command displays information about the area ranges for the specified <areaid>. The
<areaid> identifies the OSPF area whose ranges are being displayed.
Format show ip ospf range <areaid>
Modes
• Privileged EXEC
• User EXEC
Area ID
The area ID of the OSPF area associated with the interface.
Options
An integer value that indicates the optional OSPF capabilities supported by the neighbor.
The neighbor's optional OSPF capabilities are also listed in its Hello packets. This
enables received Hello Packets to be rejected (i.e., neighbor relationships will not even
start to form) if there is a mismatch in certain crucial OSPF capabilities.
Router Priority
The OSPF priority for the specified interface. The priority of an interface is a priority
integer from 0 to 255. A value of '0' indicates that the router is not eligible to become the
designated router on this network.
Dead Timer Due
The amount of time, in seconds, to wait before the router assumes the neighbor is
unreachable.
Up Time
Neighbor uptime; how long since the adjacency last reached the Full state.
State
The state of the neighboring routers.
Events
The number of times this neighbor relationship has changed state, or an error has
occurred.
Retransmission
Queue Length
An integer representing the current length of the retransmission queue of the specified
neighbor router Id of the specified interface.
Term Definition