NETGEAR ProSafe GSM7224P - Ip Dvmrp Trapflags; Show Ip Dvmrp

IP Multicast Commands
325
ProSafe Managed Switch
no ip dvmrp metric
This command resets the metric for an interface to the default value. This value is used in the
DVMRP messages as the cost to reach this network.
Format no ip dvmrp metric
Mode
ip dvmrp trapflags
This command enables the DVMRP trap mode.
Default
Format ip dvmrp trapflags
Mode
no ip dvmrp trapflags
This command disables the DVMRP trap mode.
Format no ip dvmrp trapflags
Mode
ip dvmrp
This command sets the administrative mode of DVMRP on an interface to active.
Default
Format ip dvmrp
Mode
no ip dvmrp
This command sets the administrative mode of DVMRP on an interface to inactive.
Format no ip dvmrp
Mode
show ip dvmrp
This command displays the system-wide information for DVMRP.
Format show ip dvmrp
Modes
• Privileged EXEC
• User EXEC
Interface Config
disabled
Global Config
Global Config
disabled
Interface Config
Interface Config