Switching Commands
48
ProSafe Managed Switch
spanning-tree bpdumigrationcheck
Use this command to force a transmission of rapid spanning tree (RSTP) and multiple
spanning tree (MSTP) BPDUs. Use the <unit/slot/port> parameter to transmit a BPDU
from a specified interface, or use the all keyword to transmit BPDUs from all interfaces. This
command forces the BPDU transmission when you execute it, so the command does not
change the system configuration or have a “no” version.
Format spanning-tree bpdumigrationcheck {<unit/slot/port> | all}
Mode
spanning-tree configuration name
This command sets the Configuration Identifier Name for use in identifying the configuration
that this switch is currently using. The <name> is a string of up to 32 characters.
Default
Format spanning-tree configuration name
<name>
Mode
no spanning-tree configuration name
This command resets the Configuration Identifier Name to its default.
Format no spanning-tree configuration name
Mode
spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying the
configuration that this switch is currently using. The Configuration Identifier Revision Level is
a number in the range of 0 to 65535.
Default
Format spanning-tree configuration revision
<0-65535>
Mode
no spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying the
configuration that this switch is currently using to the default value.
Format no spanning-tree configuration revision
Mode
Global Config
base MAC address in hexadecimal notation
Global Config
Global Config
0
Global Config
Global Config
To Next Page
Loading...
