NETGEAR ProSafe GSM7224P - Show Ipv6 Mld-Proxy Interface; Show Ipv6 Mld-Proxy Groups

IPv6 Multicast Commands
437
ProSafe Managed Switch
show ipv6 mld-proxy interface
This command displays a detailed list of the host interface status parameters. It displays the
following parameters only when you enable MLD-Proxy.
Format show ipv6 mld-proxy interface
Modes
• Privileged EXEC
• User EXEC
Interface Index
The column headings of the table associated with the interface are as follows:
Ver
Query Rcvd
Report Rcvd
Report Sent
Leaves Rcvd
Leaves Sent
Example: The following shows example CLI display output for the command.
(Switch) #show ipv6 mld-proxy interface
Interface Index................................ 1/0/1
Ver Query Rcvd Report Rcvd Report Sent Leave Rcvd Leave Sent
------------------------------------------------------------------
1 2 0 0 0 2
2 3 0 4 ----- -----
show ipv6 mld-proxy groups
Use this command to display information about multicast groups that the MLD-Proxy
reported.
Format show ipv6 mld-proxy groups
Mode
• Privileged EXEC
• User EXEC
Term Definition
The unit/slot/port of the MLD-proxy.
Term Definition
The MLD version.
Number of MLD queries received.
Number of MLD reports received.
Number of MLD reports sent.
Number of MLD leaves received. Valid for version 2 only.
Number of MLD leaves sent on the Proxy interface. Valid for version 2 only.