NETGEAR ProSafe GSM7224P - Bootpdhcprelay Minwaittime; Show Bootpdhcprelay

Routing Commands
264
ProSafe Managed Switch
bootpdhcprelay minwaittime
This command configures the minimum wait time in seconds for BootP/DHCP Relay on the
system. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the
seconds-since-client-began-booting field of the request as a factor in deciding whether to
relay the request or not. The parameter has a range of 0 to 100 seconds.
Default
Format bootpdhcprelay minwaittime <0-100>
Mode
no bootpdhcprelay minwaittime
This command configures the default minimum wait time in seconds for BootP/DHCP Relay
on the system.
Format no bootpdhcprelay minwaittime
Mode
show bootpdhcprelay
This command displays the BootP/DHCP Relay information.
Format show bootpdhcprelay
Modes
• Privileged EXEC
• User EXEC
0
Global Config
Global Config
Term Definition
Maximum Hop
Count
The maximum allowable relay agent hops.
Minimum Wait
Time (Seconds)
The minimum wait time.
Admin Mode
Indicates whether relaying of requests is enabled or disabled.
Server IP
Address
The IP address for the BootP/DHCP Relay server.
Circuit Id
Option Mode
The DHCP circuit Id option which may be enabled or disabled.
Requests
Received
The number or requests received.
Requests
Relayed
The number of requests relayed.
Packets
Discarded
The number of packets discarded.