Switching Commands
152
ProSafe Managed Switch
Example: The following shows example CLI display output for the command.
(switch) #show ip dhcp snooping statistics
Interface MAC Verify Client Ifc DHCP Server
Failures Mismatch Msgs Rec'd
----------- ---------- ---------- -----------
1/0/2 0 0 0
1/0/3 0 0 0
1/0/4 0 0 0
1/0/5 0 0 0
1/0/6 0 0 0
1/0/7 0 0 0
1/0/8 0 0 0
1/0/9 0 0 0
1/0/10 0 0 0
1/0/11 0 0 0
1/0/12 0 0 0
1/0/13 0 0 0
1/0/14 0 0 0
1/0/15 0 0 0
1/0/16 0 0 0
1/0/17 0 0 0
1/0/18 0 0 0
1/0/19 0 0 0
1/0/20 0 0 0
clear ip dhcp snooping binding
Use this command to clear all DHCP Snooping bindings on all interfaces or on a specific
interface.
Format clear ip dhcp snooping binding [interface <unit/slot/port>]
Mode
• Privileged EXEC
• User EXEC
clear ip dhcp snooping statistics
Use this command to clear all DHCP Snooping statistics.
Format clear ip dhcp snooping statistics
Mode
• Privileged EXEC
• User EXEC
Client Ifc
Mismatch
Represents the number of DHCP release and Deny messages received on the different
ports than learned previously.
DHCP Server
Msgs Rec’d
Represents the number of DHCP server messages received on Untrusted ports.
Term Definition
To Next Page
Loading...
