NETGEAR ProSafe GSM7224P - User Max-Total-Octets; Show Captive-Portal User

Captive Portal Commands
713
ProSafe Managed Switch
user max-total-octets
Use this command to limit the number of bytes the user is allowed to transmit and receive.
The maximum number of octets is the sum of octets transmitted and received. After this limit
has been reached the user will be disconnected. <1-128> is the user ID. The range of octets
is 0-4294967295. 0 indicates to use the global limit. Use the “no” form of this command to
reset the limit to the default.
Default 0
Format user <1-128> max-total-octets octets
Mode
no user max-total-octets
Use this command to reset the limit to the default.
Format no user <1-128> max-total-octets
Mode
show captive-portal user
Use this command to display all configured users or a specific user in the captive portal local
user database.
Format show captive-portal user [ <1-128> ]
Mode
Captive Portal Configuration mode
Captive Portal Configuration mode
Privileged EXEC mode
Term Definition
User ID
The user ID
User Name
The user name
Session Timeout
Logout once session timeout is reached (seconds). If the value is 0 then use the value
configured for the captive portal.
Idle Timeout
Logout once idle timeout is reached (seconds). If the attribute is 0 then use the value
configured for the captive portal.
Group ID
The group ID associated with the user
Group Name
The group name